Need help?Do you have a question about the cre8audio East Beast and is the answer not in the manual?
General| Brand | cre8audio |
|---|---|
| Model | East Beast |
| Category | Synthesizer |
| Language | English |
Instructions for safe and proper use of the East Beast synthesizer.
Guidelines for connecting the East Beast to a Eurorack power supply, including polarity.
Diagram and labels for all controls, inputs, and outputs on the East Beast panel.
General introduction to the East Beast synthesizer's capabilities and sound design.
Explanation of symbols and colors used on the East Beast panel for clarity.
Guide to understanding how controls, buttons, and LEDs are referenced in the manual.
Details on how internal signal paths can be modified or bypassed using patch cables.
Visual representation of the East Beast's pre-patched audio and CV signals.
Description of the East Beast's organization into six independent synthesizer modules.
Introduction to the analog oscillator, its waveform generation, and modulation capabilities.
Detailed explanation of the oscillator's knobs, jacks, and LEDs.
Description of the voltage-controlled analog state variable filter and its sound characteristics.
Detailed explanation of the filter's knobs, jacks, and LEDs.
Introduction to the four-stage ADSR envelope generator and its shaping capabilities.
Detailed explanation of the envelope's knobs, jacks, and LEDs.
Introduction to the voltage-controlled amplifier for shaping signal volume.
Detailed explanation of the VCA's knobs, jacks, and outputs.
Introduction to the low-frequency oscillator for modulation and sweeps.
Information on the available frequency ranges for the LFO.
Detailed explanation of the LFO's knobs and output jacks.
General introduction to the East Beast's integrated controller features.
Explanation of the 4-bit LED display used for settings visualization.
How to access and use the Green and Blue edit modes for advanced functions.
Details on the MIDI to CV converter, pitch tracking, and settings.
Setting MIDI channel and configuring pitch bend range for the controller.
Managing clock sources for sequencer and arpeggiator timing.
Dividing clock signals and using the integrated keyboard controller.
Introduction to the 32-step sequencer and arpeggiator functions.
How to activate and control the sequencer and arpeggiator modes.
Methods for inputting notes into sequencer and arpeggiator patterns.
Instructions for saving and loading up to 13 note patterns.
Adjusting swing, gate length, transpose, and octave range for patterns.
Choosing between sequential ('as played') or random playback for patterns.
Creating randomized note patterns with optional rests and morphing.
Details on the multi-function tool and its four output modes.
Exploring MIDI CC, LFO, random voltage, and decay envelope outputs.
Configuring exponential decay envelopes for the multi-function tool.
Reassigning keyboard buttons to Green Edit Mode functions.
Procedure to reset all modes, functions, and erase saved sequences.
Technical specifications including panel size, depth, and power consumption.
Details of the Cre8audio limited warranty for the East Beast.
How to obtain service or further information about the East Beast.
To Next Page