Creative Engineering ROCK-A-FIRE EXPLOSION - Page 8

Suggested Tool List
Description: The following is a list of suggested tools, that all
Store Technicians will need. Not having the
suggested tools will cause replacement of a part
that could have been repaired. There is a list of
miscellaneous Tools in the Parts Catalog under
character supplies, they are the only tools that
"Creative Engineering" supplies. The rest of the
tools can be purchased through a Department Store or
from a tool supplier.
Description
1) Arbor Press
2) Drill Set 1/16" through 1/2", 1/64" Increments
3) Tap Set from #6-32 through 5/16"-18
4) Drill and Tap Chart
5) Work Table Vise
6) Awl
7)
14 Piece Allen Wrench Set, 1/16"-1/2"
8) Needle Nose Pliers
9) Wire Cutters
10) Regular Pliers
11) Channel Locks
12) Vice Grips
13) 6" Combination Square
14) Measuring Tape 3/4" x 12'
15) Replacement Tape 3/4" x 12'
16) 1/8" Drift Punch
17) 3/16" Drift Punch
18) 1/4" Drift Punch
19) 5/16" Drift Punch
20) 3/8" Drift Punch
21) Center Punch
22) 6" Mill File
23) 10" Mill File
24) File Handle
25) Ball Pien Hammer, 8 oz.
26) Plastic Tipped Hammer
27) Flat Screwdriver, 4 Piece Set
28) Phillips Screwdriver, 4 Piece Set
viii