3 - PCI Card & Interfaces
The AudioDock
E-MU Digital Audio System 23
Computer Speaker Analog Outputs
These stereo mini-phone (3.5mm) jacks duplicate line level outputs 1-4 with a lower
output level to accommodate consumer speakers. These line level outputs are designed
to interface easily with powered speakers.
MIDI 2 In/Out
A second, independent set of MIDI input and output ports which can be assigned in
your specific MIDI application.
EDI Connector (Card)
Connects to the AudioDock to the E-MU 1010 PCI card using a CAT5 computer cable.
The cable supplied with the AudioDock is specially shielded to prevent unwanted RF
emissions.
Warning: The AudioDock has been designed to use readily available and
inexpensive standard computer system cables. This makes it easy for you to find
replacement cables if your original cable becomes damaged or lost. However, because
these standard cables types are used for other purposes, you must use caution to avoid
connecting the cables incorrectly. DO NOT connect the supplied EDI cable to the
Ethernet or network connector on your computer. Doing so may result in permanent
damage to either your computer, the E-MU 1010 card, or the AudioDock.
Computer Speaker Output Duplicates Line Level Output
1 L/R Tip = 1L Ring = 1R
2 L/R Tip = 2L Ring = 2R
3 L/R Tip = 3L Ring = 3R
4 L/R Tip = 4L Ring = 4R
To Next Page
Loading...