Creative sound blasteraxx SBX 10 User Manual

Guide for Windows
®
XP User
Your Sound BlasterAxx device works out-of-the-box with the
Windows XP system. No additional software is required for
Windows XP systems. However, if you experience occasional
“echo” with your Sound BlasterAxx device, you may adjust the
sound settings as follows to get the best sound performance.
Windows XP’s audio settings
1. Click Start > All Programs > Accessories > Entertainment > Volume
Control.
2. In the Volume Control screen displayed, click Options > Properties.
3. In the Properties screen displayed, ensure that the Mixer device is
Sound BlasterAxx SBX 10 and all boxes listed in Show the following
volume controls are checked. Click OK.
4. In the Volume Control screen, ensure that the Mute box under the
Personal and Microphone sections are checked and that all other
Mute boxes in the Volume Control screen are unchecked. Then click
Options > Exit.

Creative sound blasteraxx SBX 10 Specifications

General

Water Resistance	No
Type	Portable Speaker with built-in microphone
Connectivity	Bluetooth
Wireless Range	Up to 10 meters
Microphone	Built-in microphone

Summary

Windows XP Audio Settings Configuration

Navigate to Volume Control

Steps to access the Volume Control panel via Start > All Programs > Accessories > Entertainment.

Open Volume Control Properties

Accessing the Properties dialog from the Volume Control interface by clicking Options > Properties.

Configure Mixer Device and Volume Controls

Ensure the correct mixer device is selected and all desired volume controls are displayed in the Properties window.

Adjust Mute Options

Configure mute settings for Personal and Microphone sections, unmuting other volume controls.