Cressi-sub ELLIPSE User Manual

Regulators repair and maintenance
2nd stage ELLIPSE Black:
assembling phases
January 2008 Rev. ELL. OCTO /A Ed. B / 09 41
• Remember: the coupling thread is
LEFT, turn the nozzle seat in the
direction written on the valve body
(“close”), at the same time keeping the
lever depressed, so as not to damage
the pad with the nozzle sharp edge, as
shown in the picture.
• Assemblaggio della meccanica del 2°stadio
“CLOSE”

Cressi-sub ELLIPSE Specifications

General

Brand	Cressi-sub
Model	ELLIPSE
Category	Controller
Language	English