Cressi-sub ELLIPSE User Manual

Regulators repair and maintenance
January 2008 Rev. ELL. OCTO /A Ed. B / 09 42
2nd stage ELLIPSE Black:
assembling phases
Use two 0,60 in. spanners respectively in the nozzle seat hexagonal
frame and the profiling under the lever and tighten both, taking care to
keep the lever pressed so as not to damage the pad with the nozzle
cutting edge, as shown in the picture.

Cressi-sub ELLIPSE Specifications

General

Brand	Cressi-sub
Model	ELLIPSE
Category	Controller
Language	English