ENGLISH
8
TIMER (COUNTDOWN)
From this screen, pressing
SEL
accesses the
This function lets you set a countdown.
The timer can be set anywhere from 1” to 23h 59’ 59”.
Setting the Timer
From the screen press
SEL
.
Press UP /DOWN to move to seconds, minutes, or hours. The unit selected
will flash.
Press
SEL
and then UP /DOWN to change the parameter.
Press the
SEL
button until you hear the confirmation beep.
Press
ESC
to exit the function
NOTE: If you exit the Timer function while it is running, the countdown will
continue in the background.
Starting the Timer
Press UP /DOWN to start/stop the timer. When the timer is stopped, press
DOWN to return the timer to the starting point.
At the end of the countdown (timer at zero), an alarm will sound for 3 seconds.
SEL ESC
TIME HOURS
SEC.
MIN.
To Next Page
Loading...
