GTX
PAGE 20
CENTURY SERIES
L&R Mono Assignment Switches
Assign the Left and Right signals to the Mono output.
L/R/Mono Matrix Post Switches
Switches the Left, Right and Mono matrix feed signals between
pre and post-fader.
L/R/Mono PFL Switches
Allow for Pre-Fader Listening of the Left, Right and Mono sig-
nals respectively.
L/R/Mono Peak & Signal LED’s
The red LED indicates that the signal is within 3dB of the clip-
ping point. The green LED constantly displays the level of sig-
nal activity in the mix bus by varying in intensity.
L/R/Mono Faders
Adjust final output signal level of Right, Left and Mono outputs.
To Next Page
Loading...
