6
Quality, Legislation & Exclusions
4.1 Quality
All Cresto products are manufactured under ISO 9001:2008 and to the highest standards. The scope of use within the certifi-
cation held allows Crestos to design, manufacture and test Personal Protection Equipment.
Horizontal tensile test machine, abrasion tester and dynamic drop test rig are just part of the full range of test facilities used to
ensure ultimate safety of our product range.
All Cresto devices must only be installed by Cresto personnel or a trained operator. Strict training is given and written exams
are completed before full certification can be given to operators. (EC type examination for Directive
89/686/EEC by SGS United Kingdom Limited. Weston-super-Mare, BS22 6WA. UK. (Notified Body No. 0120.)
4.2 Legislation and Standards
The W2H, W2HT, W3.5H, C10-18 have been designed to meet the requirements of EN 360: 2002.
For clarification on any certification issues contact Cresto or SGS UK.
4.3 Exclusions
Cresto holds global product liability cover for your safety. Cresto will NOT however be responsible for:
a) Users who are out of the scope of any written manuals of training given.
b) Any device that has NOT been inspected under the current legislation and manufacturers guidelines.
c) Devices that have been damaged.
d) When the maximum weight in Kg has been exceeded.
e) Devices that have NO serial number markings, and the manufacturers name, Cresto AB, is not present.
To Next Page
Loading...