Crestron DM-MD8X8 - Show Full Edid Preferred Resolution Supported Resolutions Audio Formats

DigitalMedia™ Switchers Crestron DM-MD8X8/16X16/32X32
Show Full EDID
Show Full EDID
Preferred Resolution
Supported Resolutions
Audio Formats
2. Turn the selection knob to highlight the data to be viewed and press the
ENTER button.
3. Press the MENU button to return to list of available EDID data.
4. Press the MENU button to return to the list of options for the input card.
Restore Defaults
Use the Restore Defaults function to reset the card to its factory settings. The card’s
factory settings are:
x Loopback Allow Deep Color: On
x Color Space Mode: Force RGB
x Enable/Disable input: Input enabled
x Brightness level: 0
x Contrast level: 0
x Saturation level: 0
x Hue level: 0
x Red Level: 0
x Green Level: 0
x Blue Level: 0
x Coarse Phase: 0
x Fine Phase: 0
x X Position: 0
x Y Position 0
To restore the card’s default settings:
1. Turn the selection knob to highlight Restore Defaults and press the
ENTER button.
2. Press the soft button labeled Yes to restore the default setting or press the
soft button labeled No to cancel and return to the list of options for the input
card.
126 x
DigitalMedia™ Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755C