Product Manual – DOC. 8879C DM-NVX-36x(C) Encoders/Decoders • 29
Configuring DM NAX (AES67) Audio Routing
To configure DM NAX (AES67) audio routing:
1. Click the Settings tab and then clicking Routing.
2. In the Input Routing section:
a. Set Audio Source to DM NAX (AES-67) Audio.
b. Set Analog Audio Mode to Insert or Extract.
c. Set DM NAX (AES-67) Transmit Audio Source to the desired audio source for
the DM NAX (AES67) audio output.
Settings Tab – Routing, DM NAX (AES67) Routing
Using SIMPL Windows
Using the top-level programming slot for the DM-NVX-36x(C) device:
• Set the <AudioSource> analog input join to DM NAX (AES67) audio as the audio
source for the network video stream or HDMI output.
• Set the <DM NAX(AES67)AudioSource> analog input join to the desired value for
the audio source of the DM NAX (AES67) audio output.
To Next Page
Loading...
