Crestron DM NVX Series User Manual

Product Manual – DOC. 8879C DM-NVX-36x(C) Encoders/Decoders • 27
Configuring DM NAX (AES67) Audio for a DM NVX Receiver
In the DM NAX (AES67) Audio section under the Settings tab,
• In the DM NAX (AES67) Transmit section, enter the multicast address and port
number.
• In the DM NAX (AES67) Transmit Advanced section, set the Auto Initiation toggle
switch in the On (right) position or Off (left) position. By default,
Auto Initiation
is set to
On. If Auto Initiation is set to Off, start or stop the stream as desired.
The following AES67 audio stream information is displayed: status, encoding
format, encoding sample rate, bit rate, and number of channels.
• In the DM NAX (AES67) Receive section, select the desired setting in the Mode
drop-down list:
Automatic, Disabled, or Manual. The default setting is Automatic,
which adds 1 to the incoming video stream multicast address. For example, if the
video multicast address is 239.8.0.0, the DM NAX (AES67) multicast address is
automatically set to 239.8.0.1.
If Mode is set to Manual, enter the desired multicast address and port number.
• In the DM NAX (AES67) Receive Advanced section, set the Auto Initiation toggle
switch in the On (right) position or Off (left) position. By default,
Auto Initiation
is set to
On. If Auto Initiation is set to Off, start or stop the stream as desired.
The following AES67 audio stream information is displayed: status, encoding
format, encoding sample rate, bit rate, and number of channels.

Crestron DM NVX Series Specifications

General

Latency	<1 Frame
Dimensions	Varies by model
Weight	Varies by model
Video Input	HDMI
Video Output	HDMI
Audio Formats	PCM, Dolby Digital, DTS
Audio Inputs	HDMI, Analog
Audio Outputs	HDMI, Analog
Control	Crestron Control System
HDCP	HDCP 2.2
Security	AES encryption