Crestron HD-WP-4K-401-C - Configuring Individual Input Settings (OLED Menu)

Supplemental Guide – DOC. 7901B HD-WP-4K-401-C: 4K Multi-Window Video Processor • 33
NOTE: In the preceding list, External EDID 1 through External
EDID 8 represent placeholders for custom-loaded EDID files.
NOTE: Selecting Copy Output 1 or Copy Output 2 copies the
EDID from the output to all of the inputs.
ii. Select the desired EDID.
A prompt appears asking for confirmation that the selected EDID
be applied to all inputs.
iii. Select Yes or No:
• If Yes is selected, the Setting message appears, and then
the OLED display returns to the Inputs submenu.
• If No is selected, the OLED display returns to the list of
available EDIDs.
b. Configure each input on an individual basis by selecting the input number
in the Inputs submenu.
The Input Status and Configuration submenu opens for the selected input.
Input Status and Configuration Submenu (Input 1 Shown)
< Input 1 >
Status
Items on the Input Status and Configuration submenu are listed in the
following table. Refer to the table for configuration guidelines.
Input Status and Configuration Submenu Guidelines
SUBMENU
ITEM GUIDELINES
Status
(Read Only) Indicates whether a source is detected at the input:
Sync On
or
Sync Off
Name
Allows renaming of an input. To rename an input, use the up ()
and down () buttons to enter capital letters, lowercase letters,
numbers, a plus sign (+), a minus sign (-), a left bracket ([), and a
right bracket (]). To move the cursor to the left or right when
renaming an input, press the left () or right () button, respectively.
To save the name, press the
Enter
button. The message
Saving…
Complete
is displayed.
(Continued on following page)