Crestron HD-WP-4K-401-C - Configuring Device Settings (OLED Menu)

Supplemental Guide – DOC. 7901B HD-WP-4K-401-C: 4K Multi-Window Video Processor • 37
Available selections are as follows:
Details
Front Panel
Firmware Update
Restore
Items on the Device Status and Configuration submenu are listed in the following table.
Refer to the table for configuration guidelines.
Device Status and Configuration Submenu Guidelines
SUBMENU
ITEM GUIDELINES
Details (Read Only) Display the following information about the HD-WP-4K-401-C:
•
S/N:
Specifies the serial number of the HD-WP-4K-401-C
•
FW Ver.:
Specifies the firmware version of the HD-WP-4K-401-C
Front Panel
Selecting
Disable
disables the OLED display and front panel push buttons
(navigation pad,
BACK
, and
EXIT
buttons).
NOTE:
To enable the OLED display and front panel push buttons, press and
hold the
MENU
push button for 3 seconds.
Firmware Update
When
Firmware Update
is selected, a prompt appears asking for confirmation
that the firmware be updated. Select
Yes
or
No
. If
Yes
is selected, insert a
USB mass storage device containing the updated firmware file into the
SERVICE port if the device is not already inserted. The update process begins
and the following message appears on the OLED display:
Upgrade in process
Do not remove power
When the update process is complete, the OLED displays the model name
(HD-WP-4K-401-C) and the IP address of the HD-WP-4K-401-C.
Restore
When
Restore
is selected, a prompt appears asking for confirmation that the
default settings be restored.
NOTE:
Restoring the HD-WP-4K-401-C to factory default settings restores all
settings—including the user name and password settings and the network
settings—to the factory default settings.
Select
Yes
or
No
. If
Yes
is selected, the
Restoring
message appears followed
by the
Restoring…Complete
message.