Crouse-Hinds cam-lok E1016 Series - User Manual

10 pages

To Next Page

cam -lok

ASSEMBLY INSTRUCTIONS

EB 9

Series E1016 & E1018

Page 1

NOTE: USE COPPER (CU)

CONDUCTORS ONLY.

MEASURE CABLE JACKET.

CUT SLEEVE TO MATCH.

LUBRICANT

3. SLIDE ONTO CABLE.

4. REMOVE JACKET.

1–5/8”, DOUBLE SET SCREW CONTACTS

1–1/8”, CRIMP & SINGLE SET SCREW CONTACTS

5. WRAP COPPER SHIM.

NOTE: USE TWO SHIMS FOR

#2–1/0 CABLE, AND ONE

SHIM FOR 2/0–4/0 CABLE.

Need help?

Do you have a question about the Crouse-Hinds cam-lok E1016 Series and is the answer not in the manual?

Crouse-Hinds cam-lok E1016 Series Specifications

General