Crown ce 4000 - Page 21

Page 41Page 40
Reference Manual
Reference Manual
CE 4000 The amp with an Attitude!CE 4000 The amp with an Attitude!
Fig. 5.1
SST-MX
Crossover
Block Diagram
CH1
CH1 SUB OUT
TB
CH2 SUB OUT
100 Hz LP
CH2
–
–
+
+
IN
BYPASS
100 Hz HP
HOST
AMPLIFIER
CH1 INPUT
HOST
AMPLIFIER
CH2 INPUT
100 Hz LP
24 dB/oct. slope
100 Hz HP
24 dB/oct. slope
IN
BYPASS
100 Hz LP
24 dB/oct. slope
100 Hz HP
24 dB/oct. slope
–
+
–
+
–
+
3
2
1
–
+
3
2
1
Fig. 5.2
SST-SX
Crossover
Block Diagram
• Neutrik
®
Combo ¼-inch (6.35-mm) and XLR input jacks.
• Barrier block balanced outputs.
• Optional high-pass filter bypass on amplified outputs
adapts system for full-range use.
SST-SX Crossover
The SST-SX crossover module features 24-dB/octave Linkwitz-
Riley tuned filters and mono-summed sub-bass outputs for
biamp operation of subs. See Figure 5.2 for SST-SX block dia-
gram.
Features of the SST-SX
crossover include:
• Mono-summed sub-bass output.
• 24-dB/octave Linkwitz-Riley tuned filters.
• Crossover switchable between 80 and 120 Hz.
• Neutrik
®
Combo ¼-inch (6.35-mm) and XLR input jacks.
• Male 3-pin XLR outputs
• Optional high-pass filter bypass on amplified output
adapts system for full-range use.