4.When the time is set,it will begin to count down immediately.The indicator will
return to show power level after 5 seconds.
5.If you need to check the remaining time,you can operate step 1 and step 2
again.
6.When cooking timer expires,the corresponding cooking zone will be switch off
automatically.Other cooking zone will keep operating if they are turned on
previously.
• The timer function only work when at least one cooking is turned on.
Using the Double Rings
It is possible to control double rings.When a dual cooking zone is activated,the
two circuits are switched on at the same time.Activation of the external circuit is
indicated by a pilot light upon the key（G） .If only the internal circuit is to
be switched on, the external circuit can be switched off using the dual circuit key
(G).Press the dual circuit key (G) again to reactivate the external circuit and the
corresponding pilot light will switch on.
To Next Page
Loading...
