Crown CO-4KF - Page 45

Trouble shooting
Before calling the customer services,please check that the appliance is
correctly connected,any of the following cases are not covered by the
guarantee
> Damage caused by improper use,storage or maintenance.
> Damage caused by unauthorised disassembly and repair.
> Damage caused by misuse.
> Using the ceramic hob for commercial purposes.
If an abnormality comes up,the ceramic hob will enter the protective state
automatically and display corresponding protective codes:
Error
Message
Possible Cause
What to do
E6
Press any key more than 10
seconds
Release the key and then the
appliance reset automatically
H1
The temperature inside the
appliance is too high.
Stop and cooling the appliance
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the ceramic hob and please contact the supplier.
Technical Specification
Cooking Hob
CROWN VCP 32D
Cooking Zones
2 Zones
Supply Voltage
220-240V~
Installed Electric Power
3000W(230V~)
Product Size L×W×H(mm)
290X520X50
Building-in Dimensions A×B (mm)
260X490
Weight and Dimensions are approximate.Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
31