Crown CT42029 - Assembly and Usage Guide; Assembly and Wet Cleaning Procedure; Dry Vacuum Cleaning Setup; Model-Specific Operation Modes

English
6
English
5
Figure 6a:Use the supplied foamed plastic filter for wet vacuum-cleaning
Figure 6b:Use the supplied dust bag for dry vacuum-cleaning
Assembly
Wet vacuum - cleaning
Dry vacuum-cleaning
Maintenance – cleaning
Unplug before change filter (Figure 1)
Pull the supplied foamed plastic filter over the filter basket (Figure 2) for wet vacuum-cleaning.
Insert the plug and turn on the switch, then appliance starts to work (Figure 4 & 5a or 5b)
For CT42029 80L 2*1000;CT42030 80L 3*1000;CT42031 100L 3*1000: When push the switch to the
“I” position, the vacuum cleaner will work; when push the switch to the “O” position, vacuum cleaner
will not work.
For CT42029 80L 2*1000;CT42030 80L 3*1000;CT42031 100L 3*1000: When push the switch to the
“I” position, the vacuum cleaner will work alone; when push the switch to the “O” position, vacuum
cleaner will not work; when push the switch to the “II” position, while the tool which is connected with
the socket working, the vacuum cleaner also work 3-5 seconds later, while the tool stop working, the
vacuum cleaner also stop working.
The outer facility for the socket’s power is below 1000W.
The dust bag included upon delivery is not suitable for wet vacuum-cleaning!
Unplug before change filter (Figure 1), then take out the bag and empty the dust or replace the bag.
Slip the dust bag onto the socket(figure 2) for dry vacuum-cleaning.
Insert the plug and turn on the switch, then appliance starts to work (Figure 5 & 6a or 6b)
For CT42029 80L 2*1000;CT42030 80L 3*1000;CT42031 100L 3*1000: When push the switch to the
“I” position, the vacuum cleaner will work; when push the switch to the “O” position, vacuum cleaner
will not work.
For CT42029 80L 2*1000;CT42030 80L 3*1000;CT42031 100L 3*1000: When push the switch to the
“I” position, the vacuum cleaner will work alone; when push the switch to the “O” position, vacuum
cleaner will not work; when push the switch to the “II” position, while the tool which is connected with
the socket working, the vacuum cleaner also work 3-5 seconds later, while the tool stop working, the
vacuum cleaner also stop working.
The outer facility for the socket’s power is below 1000W.
The dust bag is suitable only for dry vacuum-cleaning!