Crown Xavier X-4KW-M - Function Setting: Charger Source Priority Timers; Timer Settings for Charger Source Priority

27
:
SBU
Priority
Timer
Press “ ” button to set up SBU Priority Timer. Press “ ” button to
select staring time. Press “
” button to adjust values and press
“
” to confirm. Press “ ” button to select end time. Press
“
” button to adjust values and press “ ” button to confirm. The
setting values are from 00 to 23, with 1-hour increment.
Press “ ” button to exit the Setup Mode.
3.
Timer Setting for the Charger Source Priority
This timer setting is to set up the charger source priority per day.
Procedure LCD
Screen
Step 1: Press and hold “ ” button for 3 seconds to enter Function Setting Mode
for charging source priority
Step 2: Press “ ”, “ ” or “ ” button to enter the selectable setting
(detail descriptions in Step 3).programs.
Step 3: Please select setting program by following each procedure.
Progra
m#
Operation Procedure
LCD
Screen
Press “
” button to set up Solar First Timer. Press “ ” button to
select staring time. Press “
” button to adjust values and press
“
” to confirm. Press “ ” button to select end time. Press
“
” button to adjust values and press “ ” button to confirm. The
setting values are from 00 to 23, with 1-hour increment.
Press “
” button to set up Solar & Utility Timer. Press “ ” button
to select staring time. Press “
” button to adjust values and press
“
” to confirm. Press “ ” button to select end time. Press
“
” button to adjust values, press “ ” button to confirm. The
setting values are from 00 to 23, with 1-hour increment.