OPERATOR INSTRUCTIONS
6
3-BAND SKELETAL™ CUMMERBUND ATTACHMENT (RELEASABLE)
1 Remove tri-glide buckles on each row of cummerbund webbing.
3 Push and route release cable in between cummerbund webbing rows
and continue to route cable under middle fabric piece and through next
webbing slot.
2 Push ends of cummerbund webbing through metal loops on harness to
desired location for best t.
4 Route cable out last webbing slot and stow remainder in fabric tunnel
at bottom of harness behind platebag. Excess webbing from cummerbund
can be tucked under rear platebag.
To Next Page
Loading...