18MISSION SPECIFIC CONFIGURATIONS
Pass the shoulder strap through the back webbing stow #2 on the
back of the pack.
Pass the tab through the top row of PALS on the platform.
Then, pass the tab through the bottom webbing stow on the pack. Route the shoulder strap through the second row of PALS on the
platform. Pull tight and secure the strap to the loop channel.
Unsnap the bottom MOLLE attaching tabs and pass the end
through row #6 on the platform. Secure each snap.
Completed
MOLLE-ATTACH set-up.
1
4
2
5
6
3
To Next Page