23 AVS™ 1000 PACK
SHOULDER COMPONENT INSTALLATION
Used with AVS™ SELF-ACCESS, AVS™ SEMI-FIXED, and SHOULDER PAD congurations.
Locate the hook side of the shoulder tab.
Pass the tab through back weaving bars and secure the Velcro
®
to the loop channel for desired length.
*You may pass the tab
through webbing bars at different points to adjust pack height.
The length of straps can be adjusted by securing the hook tab
higher or lower on the loop channel.
Pass the folded Velcro
®
tab through the SHOULDER STRAP D-ring.
*Ensure the components are oriented as shown in FIGURES A–C.
1
4
2
3
To Next Page
Loading...