OPTIONAL ACCESSORIES
11
6x6” SIDE POUCH (SKELETAL™ ATTACHMENT)
1. Lay cummerbund flat as shown. Position side plate pouch under
cummerbund so that the pouch straps open towards the top edge and
plate pocket opening of pouch opens towards the bottom edge. Pouch
can be installed anywhere along Skeletal™ cummerbund MOLLE. For
reference, pouch strap on right is shown fully installed.
3. To install ballistic protection, turn over cummerbund with pouch
installed and open plate pocket. Insert ballistic protection and close
pocket.
2. Weave the hook strap of the plate pouch through the webbing openings
of the cummerbund and pouch. The strap should first go through the
opening in between the two layers of cummerbund webbing (red), then
through the webbing of the pouch (blue). Secure the remainder of the
strap onto the plate pouch as shown. Weaving through the two layers of
the Skeletal™ cummerbund allows other items to still attach to the outer
side of the cummerbund.
4. Don vest to check that the side pouch is securely fastened to the
cummerbund. Ensure that placement of pouch is correct and make any
adjustments as necessary. Repeat for other side of vest if desired.
To Next Page
Loading...