Need help?Do you have a question about the CSZ ELECTRI-COOL II and is the answer not in the manual?
General| Brand | CSZ |
|---|---|
| Model | ELECTRI-COOL II |
| Category | Accessories |
| Language | English |
Provides essential safety guidelines for the proper use and understanding of the Electri-Cool® II cold therapy system.
Details the components and key features of the Electri-Cool® II system, including temperature ranges and indicators.
Describes the specific application of the Electri-Cool® II Model 767 Portable Cold Therapy Unit for post-surgical wound site therapy.
States that there are currently no known contraindications for the use of the Electri-Cool® II system.
Provides instructions on how to properly drain, package, and transport the Electri-Cool® II system, including environmental ranges.
Guides the user through initial equipment setup, including checking the air filter and ensuring the reservoir is filled to the maximum level.
Details the process of filling the Electri-Cool® II reservoir with distilled water to the maximum level and connecting the pad.
Outlines the steps for powering on the Electri-Cool® II, including checking indicators and water flow during the startup sequence.
Explains how to set the desired temperature range on the Electri-Cool® II, noting the required time for temperature stabilization.
Lists and describes various accessories for the Electri-Cool® II, including thermal pads, supports, and hoses, with their category numbers.
Provides instructions for connecting, applying, and using CSZ thermal pads with the Electri-Cool® II system for optimal patient comfort and therapy.
Outlines the procedure for disposing of the Electri-Cool® II and related medical devices, following local and hospital guidelines.
Details the correct methods for cleaning the external case of the Electri-Cool® II using approved topical cleaners, avoiding alcohol.
Provides caution and instructions for draining and preparing the Electri-Cool® II for storage, emphasizing disinfection procedures.
Provides a guide for service technicians to diagnose common problems with the Electri-Cool® II system and their probable causes.
Details specific indicator conditions, including low water and low temperature, and their corresponding LED and audible alerts.
Instructs on performing a visual inspection of the Electri-Cool® II unit for any physical damage, including the power cord and fuse.
Details the procedure for inspecting and replacing the air filter on the bottom of the unit to ensure optimal airflow and performance.
Describes how to perform a flow test to ensure proper water circulation through the pad and hose, checking for restrictions.
Provides detailed steps for testing the temperature accuracy of the Electri-Cool® II at different set points using a temperature probe.
Explains how to test the low water switch and indicator by manually lowering the float, verifying unit response.
Details the procedure for testing leakage current to ensure electrical safety, specifying acceptable limits and troubleshooting steps.
Describes how to measure ground continuity using an ohmmeter, ensuring resistance is within acceptable limits for safety.
Details tests for the water temperature low-limit thermistor on different control board revisions to ensure accurate temperature regulation.
Guides on performing an internal physical inspection for leaks, loose components, or wiring damage, and ensuring proper reassembly.
Details the safety and electrical safety classifications of the Electri-Cool® II system by Underwriters Laboratory Inc.
Confirms that the Electri-Cool® II system has been tested and passed electromagnetic compatibility requirements as per IEC 60601-1-2.
Explains how to obtain replacement parts for the Electri-Cool® II system and the necessity of using a biomedical technician for service.
Provides a comprehensive list of all replacement parts for the Electri-Cool® II system, including item numbers, descriptions, and illustrations.
Details the procedure for disinfecting the fluid circuit using household bleach, including specific amounts and circulation steps.
Details the procedure for disinfecting the fluid circuit using CE approved cleaning agents like Gigasept FF or Maranon H.
To Next Page