Chapter 6. Manage / Configure the Switch
23
6.2.2 General Basic Commands
Wh
en “admin” / “admin” is used for username/password, the console will enter administrator mode. Enter “?”,
command list will be shown.
------------------------------------------------------------------------------------
# ?
exit Exit from current mode
help Show available commands
history Show a list of previously run commands
logout Disconnect
ping Sends ICMP echo packets to other network nodes
quit Quit commands
reload Halts and performs a warm restart
show Shows information
calendar Data and time information
configure Enter configuration mode
copy Copies from one file to another
#
------------------------------------------------------------------------------------
1. exit command
This command is used to leave current operation mode. It will do logout at this basic command interface.
2. help command
This is a help command and the console will prompt with all available commands.
3. history command
This command will show the history of entering commands.
4. logout command
This is a logout command.
To Next Page
Loading...
