Need help?Do you have a question about the CTE ZED 23.2 JH and is the answer not in the manual?
General| Brand | CTE |
|---|---|
| Model | ZED 23.2 JH |
| Category | Construction Equipment |
| Language | English |
Manual provides instructions for correct use, routine maintenance, and filling control register.
Describes machine, declared use, technical features, and operator training requirements.
Contact nearest authorised centre for extraordinary maintenance, repairs, or spare parts.
Details machine model, type, manufacturer, and identification plate information.
Describes the Zed 23.2JH elevated work platform components and their functions.
Lists key technical specifications including capacity, height, reach, wind speed, and pressure.
Illustrates the operational work area diagram for the elevated work platform.
Details various safety devices including emergency stop buttons, pressure relief valves, and brakes.
Details the controls on the ground panel and in the work platform.
Outlines mandatory safety standards, obligations, and prohibitions for safe operation.
Warns about electrocution hazard and mandatory safety distances from live lines.
Details risks of tipping due to ground instability, inclination, or overload.
Covers risks of falling and mandatory use of fall-prevention devices and anchor points.
Provides a quick reference of instruction rules and standards for the operator.
Details required personal protection equipment, including harness systems.
Emphasizes reading previous chapters and following instructions for safe operation.
Provides guidelines for operating in public areas and cordoning off the work zone.
Mandates pre-use checks on land, work area, fuel, manual, stickers, and hydraulic oil.
Guides on starting the engine, inserting PTO, and using ground controls for stabilisation.
Describes procedures for emergency stop, work platform levelling, and recovery scenarios.
Covers machine loading onto transport vehicles, including height checks and fixing devices.
Describes routine maintenance tasks for operators and qualified technicians.
Summarizes maintenance operations, frequency, and responsible personnel (operator/technician).
Covers maintenance for hydraulic components like cylinders, joints, piping, and controls.
Provides instructions for checking hydraulic oil level and replacing oil and filters annually.
Covers lubrication points and frequency for machine pins and other components.
Covers checking operation of stabiliser/boom interlock limit switches before use.
Details testing the overload device efficiency before every use.
Explains the user calibration procedure to reset the load reading to zero.
Describes the optional 230V socket for powering devices, with connection and safety precautions.
Explains the function of man-present pedals that deactivate manoeuvres when not pressed.
Details auxiliary electric pumps powered by current for environments where the engine is not allowed.
To Next Page