CTEK MXS 5.0 User Manual

EN • 9
EN
OPERATING
INSTRUCTIONS
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. The power lamp
will indicate that the mains cable is connected to the wall
socket. The error lamp will indicate if the battery clamps are
incorrectly connected. The reverse polarity protection will
ensure that the battery or charger will not be damaged.
3. Press the MODE-button to select charging program.
SMALL BATTERY
PROGRAM
NORMAL BATTERY
PROGRAM
Continue to press the MODE-button to combine charging
program with charging options.
AGM
AGM OPTION
RECOND
RECOND OPTION
Press the MODE-button several times until the desired
combination of charging program and options are lit.
4. Follow the 8-step display through the charging process.
The battery is ready to start the engine when STEP 4 is lit.
The battery is fully charged when STEP 7 is lit.
5. Stop charging at any time by disconnecting the mains cable
from the wall socket.
MXS 5.0
AGM RECOND
ERROR
LAMP
FULLY CHARGED
READY TO USE
MODE
BUTTON
SMALL
BATTERY
PROGRAM
NORMAL
BATTERY
PROGRAM
POWER
LAMP
RECOND
OPTION
AGM
OPTION
50013552C MXS 5.0 NA, Manual, Print file 002.indd 7 2016-11-21 15:01:26

CTEK MXS 5.0 Specifications

General

Input voltage	220-240 V
Input frequency	50/60 Hz
Battery voltage	2 V
Cable color	Black
Operating temperature (T-T)	-20 - 50 °C
Number of batteries supported	-
Product color	Black, Silver

Weight and Dimensions

Depth	168 mm
Width	65 mm
Height	38 mm
Weight	600 g