CTN X-CRYO - Screen Operation; Welcome Screen; Pre-cooling Screen

2. Pre-cooling Screen
At the pre-cooling screen, press the “PRECOOL” button to activate pre-cooling. According to the
room temperature the device will need approximately 5-10 minutes for pre-cooling before it is
ready to use. When pre-cooling has reached 100% it will enter the operating screen as shown in
picture 3.1;"
www.cryotechnordic.com
PICTURE 1: WELCOME SCREEN
PICTURE 2.1: PRE-COOLING SCREEN
PICTURE 2.2: PRE-COOLING SCREEN