5 / 9
www.cuav.net 雷迅创新
minutes). During the heating process, the sensor will have a certain airspeed offset. When there is no wind,
the airspeed display is greater than 3m/s, please perform airspeed offset calibration before takeoff.
Method:
Place the pitot in a windless environment.
Run Mission planner > Data > Actions
Select "Preflight Calibration" in the first checkbox; click the "Do Action" button on the right
Preflight Airspeed Check
Please place the pitot tube in a windless environment to ensure that the airspeed value jumps within the
range of 0~3m/s.
To Next Page
Loading...