Cub Cadet 19A30028100

CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
InstallatIon Manual
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
Contents of Carton .................................................. 2
Installation ............................................................... 3
Warranty .................................................................. 6
español ........................................................................
français ........................................................................
Table of Contents
Material Spreader with Hitch Bracket Assembly
19A30028100
Form No. 769-11683D
(December 19, 2017)

Cub Cadet 19A30028100 Specifications

General

Brand	Cub Cadet
Model	19A30028100
Category	Spreader
Language	English

Summary

Installation

Hitch Bracket Assembly

Instructions for assembling and installing the hitch bracket to the tractor.

Material Spreader Assembly

Steps to attach the motor, spinner disc, and related components to the hopper.

Material Deflector Installation

Procedure for installing the material deflector onto the hopper or frame.

Hitch Bracket to Spreader Attachment

Connecting the assembled hitch bracket to the main spreader frame.

Spreader Control System

Installing the control plate, rod, and handle for spreader operation.

Electrical Wiring and Battery Connection

Connecting the switch harness, motor wire, and battery clips.

Coverage Calibration and Settings

Using charts and formulas to determine tractor speed for coverage.

Limited Warranty