Periodic Maintenance and Adjustment 8-56
Table 2：Solution of Common Problems in Brake System
S/N Problems
Solutions
1 Locked braking system
1. Che
ck whether brake disc plates deformed or damaged.
2. Check whether hydraulic cylinder is locked or brake clamp
assembly p
arts are deformed or damag
ed.
2
Brake performance
decreases
1. Che
ck the disc brake pads for excessive wear
.
2. Check the brake pads and rotor disc for excessive wear or
oil whi
ch might have gotten on either
.
3. Check brake fluid and refill if necessary.
3
Grinding noises from front
brake or brake rotor
become red during
operation due to heat.
1.
C
heck brake rotor for excess wear
.
2. Check whether hydraulic cylinder is locked or brake clamp
assembly p
arts are deformed or damag
ed.
4
Grinding noises from front
brake or brake rotor
become red during
operation due to heat.
1. Che
ck whether brake disc plates deformed or damaged.
2. Check whether hydraulic cylinder is locked or brake clamp
assembly p
arts are deformed or damag
ed.
3. Check if rear brake is locked and will not release. Check if
the p
arking brake is in the “ON” po
sition.
To Next Page
Loading...