Cub Cadet Enduro Series User Manual

Problem Cause Remedy
Excessive vibration
1. Cutting blade loose or unbalanced.
2. Damaged or bent cutting blade.
1. Tighten blade and spindle.
2. Replace blade.
Uneven cut
1. Deck not leveled properly.
2. Dull blade.
3. Uneven tire pressure.
1. Perform side-to-side deck adjustment.
2. Sharpen or replace blade.
3. Check tire pressure in all four tires.
Troub leshooting
8
30

Cub Cadet Enduro Series Specifications

General

Transmission	Hydrostatic
Horsepower	Varies by model
Cutting Width	42 inches
Deck Material	Steel
Engine	Varies by model
Cutting Height	1-4 inches
Fuel Capacity	3 gallons
Weight	Varies by model
Warranty	3 years limited