To Next PageTo Next Page
Need help?Do you have a question about the Cub Cadet RZT 42 and is the answer not in the manual?
General| Engine Brand | Kohler |
|---|---|
| Engine Displacement | 725cc |
| Engine Type | 4-Cycle |
| Cutting Width | 42 inches |
| Transmission | Hydrostatic |
| Fuel Capacity | 3 gallons |
| Deck Material | Steel |
| Deck Construction | Stamped |
| Deck Positions | 8 |
| Blade Engagement | Electric PTO |
| Turning Radius | Zero-turn |
| Weight | 500 lbs |
| Warranty | 3 years limited |
| Cutting Height | 1.5 - 4 in |
Instructions for installing the operator's seat for shipping purposes.
Repositioning drive control levers from shipping to operating position.
Connecting the negative battery cable to the tractor battery.
Guidelines for safe operation of the tractor and mower.
Safety precautions and procedures for operating on slopes.
Identifies indicators on the control panel: Deck Height, Throttle, Park Brake.
Locations and content of general safety instruction decals.
Graphics related to mower deck safety, including hands/feet and general warnings.
Warning about operating on slopes exceeding 15 degrees.
Information on how to contact for service and support.
Importance of recording model and serial numbers for service.
Details on the deck height index and its notches.
Location and function of the deck lift handle.
Operation and function of the drive control levers.
Operation of the ignition switch for starting and stopping.
Operation of the PTO switch to engage/disengage the mower deck.
Features and indicators on the hour meter panel.
Operation of the throttle control for engine speed.
General safety guidelines before and during operation.
Pre-operation checks and fuel recommendations.
Explanation of the safety interlock system functions.
Step-by-step instructions for starting the tractor engine.
Procedures for safely stopping the tractor engine.
Instructions for driving the tractor forward and reverse.
Procedures for performing zero-degree turns.
Safety guidelines and procedures for operating on slopes.
How to engage and operate the Power Take-Off (PTO).
Periodic checks of the safety interlock system.
How to adjust the operator's seat for comfort and visibility.
Adjusting drive control levers for height and position.
General engine maintenance procedures.
Procedure for changing the engine oil and oil filter.
Maintenance of the air cleaner system, including precleaner and paper element.
Procedures for checking, gapping, and replacing the spark plug.
Information regarding hydrostatic transmission maintenance.
Steps for safely removing the tractor battery.
Guidelines for charging the tractor battery.
Instructions for using transmission bypass rods to move the tractor.
Adjusting control levers for proper tractor tracking.
Procedures for preparing the tractor for storage.
Steps to remove the mower deck from the tractor.
Steps to install the mower deck onto the tractor.
Adjusting the mower deck for side-to-side and front-to-back level.
Adjusting gauge wheels for anti-scalp feature.
Procedures for sharpening and maintaining mower blades.
Lubrication points for the mower deck spindle assemblies.
Steps for replacing the mower deck drive belt.
Details warranty coverage for emission control systems.
Owner's duties regarding maintenance and warranty claims.
Exclusions from the emission control system warranty.
Information on how to obtain warranty service and locate dealers.
Explains how local laws interact with the limited warranty.
