Body
19
6. Disconnect the key switch. See Figure 3.12.
7. Disconnect the hour meter.
8. Disconnect the PTO switch.
9. Remove the two screws from the underside of the
right fender using a 3/8” wrench. See Figure 3.13.
10. Lift the fender off of the mower.
11. Install the fender by following the previous steps in
reverse order.
12. Test drive the mower in a safe area before returning
it to service.
NOTE: Confirm that all safety and control features work
correctly. Do Not return an unsafe mower to ser-
vice.
Figure 3.12
Key switch
PTO switch
Hour meter
Figure 3.13
www.mymowerparts.com
For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
To Next Page
Loading...
