Page%17%of%25%
%
Using the spare wheel winder provided, feed the handle through the Ring that’s welded on the chassis of
the camper and wind down the spare. Disconnect the chain and move out from under the camper ready to
change the wheel.
Chock the wheel opposite to the one you are changing and using the wheel brace provided loosen the
wheel nuts (but do not undo) of the wheel to be changed.
Use the jack supplied, position the jack under the axle closest to the wheel you are changing. Use the jack
handle to wind the jack up raising the wheel high enough that it spins freely.
Continue to undo the wheel nuts with the wheel brace and remove the wheel.
Place the spare on the wheel studs and do up the wheel nuts.
Lower the Jack and remove.
Do up the wheel nuts firmly.
Place the flat tyre under the camper by attaching the chain and winding it back up firm against the
underside of the camper.
At the next available services, get tyre repaired.
Please ensure when using a jack that the area is safe, nobody is under the trailer,
and that the other wheel is securely chocked.
Regularly check the wheel nuts to ensure that they remain firmly done up.
COOKTOP INSTRUCTIONS
To Next Page
Loading...