Warning
Warning
The Ice Machine must be plugged into a grounded outlet.
- Do not use an adapter or an extension cord.
- Do not remove the grounding prong.
- The unit must be installed in accordance with the state and
local electrical and plumbing codes.
The Ice Machine must be connected to a GFCI receptacle
or a GFCI circuit breaker.
- Rated sensitive current: 30mA.
- An ungrounded circuit may cause product failure or an
electric shock.
The power cord should be removed by holding the plug.
- Do not remove plug by holding the cord or electric shock
may occur.
- Damage to the cord could cause fire or electrical shock.
Do not connect or touch the power cord plug with a wet hand.
- Otherwise, the user may get an electric shock.
Check that the power plug is clean and without any foreign matter.
Insert the plug fully into the receptacle.
- If the pins of the power cord plug are dirty, wet or improperly
connected to the receptacle, electric shock or fire may occur.
When reconnecting the power cord after disconnection, wait for at
least five minutes before reconnection.
- Reconnection within five minutes may cause product failure.
Wait at least 5 minutes!
To Next Page