Cubot P40 - Page 41

EU Declaration of Conformity
for
Radio Equipment Directive (RED) 2014/53/EU
Shenzhen Huafurui Technology Co., Ltd.
hereby, declare that the essential requirements set out in the Radio Equipment Directive
(RED) 2014/53/EU have been fully fulfilled on our product with indication below:
Product Name: Smartphone
Model / Brand Name: P40/ CUBOT
Adapter Model: HJ-0502000W2-EU
Brand Name: CUBOT
Manufacturer: SHEN ZHEN HUAJIN ELECTRONICS CO., LTD
Input: 100-240Vac, 50/60Hz, 0.3A
Output: DC 5.0V, 2.0A
Battery Model: J9
Brand Name: CUBOT
Manufacturer: Zhongshan Tianmao Battery Co., Ltd
Output: 3.85Vdc, 4200mAh
USB: SHENZHEN GYHONTEN ELECTRONICS CO., Ltd/1m/2A/ Type-c
Hardware version: V956_MB_V1.0_20200220
Software version: CUBOT_P40_A023C_V05_20200521
The following standards have been applied for the investigation of compliance:
ETSI EN 301 511 V12.5.1 (2017-03)
ETSI EN 301 908-1 V11.1.1 (2016-07)
ETSI EN 301 908-2 V11.1.2 (2017-08)
ETSI EN 301 908-13 V11.1.2 (2017-07)
EN 50360:2017, EN 50566:2017
EN 62209-1:2016, EN 62209-2:2010
EN 50663:2017,EN 62479:2010
ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-3 V2.1.1 (2019-03)
Draft
ETSI EN 301 489-17 V3.2.2 (2019-12)
ETSI EN 301 489-19 V2.1.1 (2019-04)
Draft
ETSI EN 301 489-52 V1.1.0 (2016-11)
ETSI EN 300 328 V2.1.1 (2016-11)
ETSI EN 303 413 V1.1.1 (2017-06)
ETSI EN 303 345-1 V1.1.1 (2019-06)