28
PPrreeppaarraattiioonnss bbeeffoorree uussee
Split water tank
●
When you split water tank, split it after hav-
ing pressed “open” button of the left, and
make sure to remove inappropriate sub-
stances in water tank.
12
Unfasten water tank cover and
put tap water into water tank.
●
Put clean tap water into water tank. And
using water of water purifier will be better.
●
Don’t put water more than 40°C, aromat-
ic, chemicals and detergent into water
tank.
Don’t use underground water, otherwise it may
cause some problem.
Fasten cover so that water can’t
leak and put water tank into the
main body.
●
When you put water tank into the main
body, check if water in water tank leaks
and water tank was put in the main body
completely.
3
4
Put a plug in the socket
●
Put a plug in the socket after water has
been put into water tank completely.
●
Make clean indoor environment accord-
ing to using method of control section.
CAUTION
● Don’t put water into the main body after having put a plug in the socket. Otherwise
electric shock can be caused.
● Because water tank can get damaged if you drop it or it gets shock, give full attention.
To Next Page
Loading...