Cuisinart 10ce113938 - User Manual

To Next Page

We warrant that should your Cuisinart® Programmable Conical Burr Mill prove

to be defective within the warranty period, we will repair it or replace it at our

option, without charge to you. We recommend that you visit our website,

www.cuisinart.com for a fast, eﬃcient way to complete your product registra-

tion. However, product registration does not eliminate the need for the con-

sumer to maintain the original proof of purchase in order to obtain the warranty

beneﬁts. In the event that you do not have proof of purchase date, the purchase

date for purposes of this warranty will be the date of manufacture. To obtain

warranty service, simply call our toll-free number: 800-726-0190, for additional

information from our Consumer Service Representatives, or send the product to

Consumer Service at Cuisinart, 7811 North Glen Harbor Blvd., Glendale, AZ

85307. To facilitate the speed and accuracy of your return, please enclose a check

or money order for $4.00 for shipping and handling.

(California residents need only supply proof of purchase and should call 1-800-

726-0190 for shipping instructions.) NOTE: For added protection and secure

handling of any Cuisinart® product that is being returned, we recommend you

use a traceable, insured delivery service. Cuisinart cannot be held responsible

for in-transit damage or for packages that are not delivered to us. Lost and/or

damaged products are not covered under warranty. Your Cuisinart® Program-

mable Conical Burr Mill has been manufactured to strict speciﬁcations and has

been designed for use with the Cuisinart® Programmable Conical Burr Mill

authorized accessories and replacement parts for your model. ese warranties

expressly exclude any defects or damages caused by accessories, replacement

parts or repair service other than those that have been authorized by Cuisinart.

ese warranties exclude all incidental or consequential damages. Some states do

not allow the exclusion of or limitation of incidental or consequential damages,

so the foregoing limitation or exclusion may not apply to you.

CALIFORNIA RESIDENTS ONLY

California law provides that for In-Warranty Service, California residents have

the option of returning a nonconforming product (A) to the store where it was

purchased or (B) to another retail store which sells Cuisinart products of the

same type. e retail store shall then, according to its preference, either repair

the product, refer the consumer to an independent repair facility, replace the

product, or refund the purchase price less the amount directly attributable to the

consumer’s prior usage of the product. If the above two options do not result in

the appropriate relief to the consumer, the consumer may then take the product

to an independent repair facility if service or repair can be economically accom-

plished. Cuisinart and not the consumer will be responsible for the reasonable

cost of such service, repair, replacement, or refund for nonconforming products

under warranty. California residents may also, according to their preference,

return nonconforming products directly to Cuisinart for repair or, if necessary,

replacement by calling our Consumer Service Center toll-free at 800-726-0190.

Cuisinart will be responsible for the cost of the repair, replacement, and shipping

and handling for such nonconforming products under warranty.

BEFORE RETURNING YOUR CUISINART PRODUCT

Important: If the nonconforming product is to be serviced by someone other

than Cuisinart’s Authorized Service Center, please remind the servicer to call

our Consumer Service Center to ensure that the problem is properly diagnosed,

the product serviced with the correct parts, and to ensure that the product is still

under warranty.

CBM-18

Programmable Conical Burr Mill

MANUAL GRIND

If you prefer, after selecting your grind setting, you have the

option of manually controlling how much coﬀee the unit will

grind. To do so, follow steps 1-4 on previous page. en press

and hold the manual button until the desired amount of coﬀee

has been ground. e LCD will display M.

NOTE: To avoid overﬂow when using the manual feature, the

grinder will automatically stop grinding when the maximum

capacity has been reached.

GRINDING SETTINGS

When selecting your grind setting remember that the higher the

number the coarser the grind. Use 1-6 for Espresso, 7-12 for

Auto Drip, and 13-18 for French Press.

CLEANING/MAINTENANCE

INSTRUCTIONS

1. Be sure plug has been removed from outlet.

2. Beans can be removed from the hopper by lifting off the lid

and pouring excess beans out. Hold down the Manual button

to cleanout any remaining beans.

3. The bean hopper, bean hopper lid, grind chamber, and grind

chamber lid can be washed by hand with hot, soapy water or

placed in the top shelf of a dishwasher. Dry thoroughly.

a. Remove the bean hopper by rotating counter-clockwise

bringing the selector past grind setting 18, align the

arrows and lift up. Make sure the hopper is empty.

b. Remove grind chamber by pulling toward you.

4. Remove the burr grinder, once the bean hopper has been

removed, by grasping the metal handle and lifting up. Use

the brush to remove grinds or wash by hand. Replace the

burr grinder onto the unit and rotate until the piece is fully

inserted. Push handle down and replace hopper.

NOTE: The hopper will not attach to the unit if the

grinder has not been fully inserted.

5. Wipe body of grinder with a damp cloth.

6. Any other servicing or maintenance should be performed by an

authorized service representative.

WARNING: NEVER IMMERSE UNIT IN WATER

WARRANTY

e Cuisinart® Programmable Conical Burr Mill carries a Limited

18-Month Warranty. is warranty is available to consumers only.

You are a consumer if you are the owner of a Cuisinart® Programmable Conical

Burr Mill that was purchased at retail for personal, family, or household use.

Except as otherwise required by applicable state law, this warranty is not available

to retailers or other commercial purchasers or owners.

150 Milford Road, East Windsor, NJ 08520

Printed in China 10CE113938

IB-8304A

10ce113938_cbm18_ib.indd 1-3 7/23/10 3:59:11 PM

Need help?

Do you have a question about the Cuisinart 10ce113938 and is the answer not in the manual?

The Cuisinart Programmable Conical Burr Mill (CBM-18) is a sophisticated coffee grinder designed to deliver precise and uniform grinding for various brewing methods, including Espresso, Auto Drip, and French Press. It utilizes conical burrs, which are known for grinding beans with consistent uniformity while preserving the full flavor of the coffee bean. This fully automated grinder simplifies the coffee preparation process, allowing users to select their desired grind setting and number of cups, then initiate grinding with a single button press. The integrated LCD with a countdown timer provides real-time feedback on the grinding process.

Function Description:

The primary function of the Cuisinart CBM-18 is to grind roasted coffee beans. It offers a wide range of grind settings to accommodate different brewing preferences:

Espresso: Grind settings 1-6
Auto Drip: Grind settings 7-12
French Press: Grind settings 13-18

Users can choose between automated grinding, where the unit grinds a pre-selected number of cups, or manual grinding, which allows for continuous grinding until the desired amount is achieved. The grinder is equipped with a safety interlock system that prevents operation unless the bean hopper and grind chamber are properly in place, ensuring safe use.

Important Technical Specifications:

Bean Hopper Capacity: 8 oz (maximum)
Cup Settings: 2 to 14 cups
Grind Settings: 18 distinct settings (1-18)
Display: LCD with countdown timer
Safety Features: Safety interlock system, automatic shut-off for overfilling or overheating.
Material: All parts that come into contact with coffee are BPA-Free.
Power: Polarized plug for electrical safety.
Warranty: Limited 18-month warranty.

Usage Features:

Bean Loading: The bean hopper lid is removed, and roasted coffee beans are added to the hopper, ensuring the lid closes securely. The hopper has an 8 oz maximum capacity.
Grind Setting Selection: Users rotate the bean hopper to select one of the 18 available grind settings. The chosen setting is displayed on the LCD. Higher numbers correspond to coarser grinds.
Cup Setting Selection: The "# of Cups Button" is pressed repeatedly to select the desired number of cups (from 2 to 14). Holding the button allows for quick scrolling through the numbers.
Grinding Initiation: Pressing the "Start/Stop Button" begins the grinding process. The LCD displays a countdown timer.
Manual Grinding: After selecting a grind setting, users can press and hold the "Manual Button" to grind until the desired amount of coffee is achieved. The LCD will display "M" during manual grinding. The grinder will automatically stop if maximum capacity is reached to prevent overflow.
Pausing/Canceling:
- To pause: Press the "Start/Stop Button" once. The grinder will stop, and the countdown timer will flash. Press again to resume.
- To cancel: Press and hold the "Start/Stop Button" for 2-3 seconds. The unit will pause for up to 5 minutes before canceling.
Automatic Shut-off: The grinder automatically stops upon completion of the selected grind cycle. It also stops if the grind chamber is overfilled (displaying a flashing LCD) or if the motor overheats (displaying "HHH" on the LCD). In case of overheating, a 2-minute cool-off period is recommended before resuming use.
Grind Chamber Removal: The grind chamber can be easily pulled toward the user to remove it from the unit after grinding.

Maintenance Features:

Unplugging: Always ensure the unit is unplugged from the outlet before cleaning or maintenance.
Bean Removal: Excess beans can be removed from the hopper by lifting the lid and pouring them out. Any remaining beans can be cleared by holding down the "Manual Button" to run the grinder empty.
Washable Components: The bean hopper, bean hopper lid, grind chamber, and grind chamber lid are dishwasher-safe (top shelf only) or can be washed by hand with hot, soapy water. They must be dried thoroughly.
Component Disassembly for Cleaning:
- Bean Hopper: Rotate counter-clockwise past grind setting 18, align arrows, and lift up. Ensure the hopper is empty before removal.
- Grind Chamber: Pull toward you to remove.
- Burr Grinder: Once the bean hopper is removed, grasp the metal handle of the burr grinder and lift it up. Use the provided brush to remove grinds or wash by hand.
Component Reassembly: Replace the burr grinder onto the unit and rotate until fully inserted. Push the handle down and replace the hopper. The hopper will not attach if the grinder is not fully inserted.
Exterior Cleaning: The body of the grinder can be wiped with a damp cloth.
Warning: Never immerse the unit in water.
Servicing: Any other servicing or maintenance should be performed by an authorized service representative.