Need help?Do you have a question about the CUMMINS ALLISON JetCount 4020 and is the answer not in the manual?
General| Stacker Capacity | Up to 200 notes |
|---|---|
| Counterfeit Detection | UV, MG |
| Display | LCD |
| Power Consumption | 60 watts |
| Power Supply | 100-240V, 50/60Hz |
High voltage warning and notice regarding proper operation and cleaning procedures.
Details on voltage range, frequency, and dedicated power line requirements.
Specifies the full load amps (FLA) and power rating information.
Statement regarding FCC rules for Class A digital devices and radio frequency emissions.
Lists safety certifications including UL, CE, and EN compliance standards.
Section for user records, feature overview, and recommended maintenance.
Details the control panel layout and key functions for the Model 4020.
Details the control panel layout and key functions for Models 4021 and 4022.
Details the control panel layout for the Model 4020.
Explanation of individual keys and their functions on the Model 4020 control panel.
Details the control panel layout for Models 4021 and 4022.
Explanation of individual keys and their functions for Models 4021 and 4022.
Details key numbering schemes and optional key-top kits for direct access.
Explanation of direct access keys for denomination selection and their functions.
Covers power safety, hopper hazards, and density operation adjustments.
Enabling Suspect Document Detection and configuring sensitivity levels.
Instructions on how to adjust the feeder tightness using the thickness adjustment dial.
Details on Count and Value modes and how to switch between them.
Details on Strap and Batch memory levels and setting strap limits.
Information on printer connection, report generation, and setup report printing.
Settings for default type, audio alarm, speed, ports, and key lockout.
Settings for comm reports, options, SD function, density, and function keys.
Details sensitivity levels and the menu for suspect document detection.
Explanation of COUNT mode, document processing, and stopping conditions.
Using direct access keys to preset strap limits.
How batch accumulation works with ADD OFF and an example.
How batch accumulation works with ADD ON and an example.
Explanation of VALUE mode, document processing, and setting denomination.
Procedure to enter special modes and navigate User Set Up/Default modes.
Instructions for navigating, changing, saving, and setting up fields like denomination keys.
Accessing diagnostic mode and procedures for exiting special modes.
Explanation of default types and procedure for setting the default type to USER.
Details alarm conditions and how to enable/disable them.
Configuration options for processing speed settings (LOW, MED, HIGH).
Information on port usage and instructions for key lockout.
Options for communication reports and enabling magnetic/UV detection.
Enabling/disabling SD sensitivity view/change and understanding results.
Details lockout results, function key setup, and printer type selection.
Procedure for generating a print report from the Setup Field.
Enabling COUNT or VALUE display on a connected remote display.
Recommended procedures and materials for daily cleaning of the JetCount unit.
Steps to power off, disconnect cord, and remove the feeder plate.
Procedure for cleaning the black start sensor on the feeder plate.
Cleaning aluminum/feed rollers, stacker dust, and sensor/mirror.
Instructions for replacing the feeder plate correctly.
Procedure for cleaning and lowering the hopper, then reconnecting power.
Performing a test run with notes after cleaning.
Handling normal time-out, strap limits, and suspect document conditions.
Procedure for clearing a jam and resuming machine operation.
Handling chain, double, and half note detection conditions.
Details on processing speed, accuracy, capacity, size, weight, and conditions.
Lists available machine options like RS-232 communications and key-top kit.
Definitions of safety icons and glossary terms like Batch, Chains, Modes.
Definitions for Factory Mode, Hopper, Reset, Setup Fields, Stacker, Strap, and Suspect Document Sensitivity.
Details the warranty terms for the physical equipment and included software.
Conditions for warranty, limits on liability, and handling infringement claims.
To Next Page
