To Next PageTo Next Page
Need help?Do you have a question about the CUMMINS J1939 T4 and is the answer not in the manual?
General| Brand | CUMMINS |
|---|---|
| Model | J1939 T4 |
| Category | Control Panel |
| Language | English |
Procedure for starting and stopping the engine using manual controls.
Settings for J1939 CAN bus communication between panel and engine ECU.
Details on Deutsch and Amphenol connectors used on the panel.
Specifications for 31-pin and 16-pin engine harness connectors.
How the ECU manages alarms, de-rates, and shutdowns based on engine parameters.
Panel's role in displaying ECU trouble codes, descriptions, and occurrence counts.
Panel monitoring of system switches causing engine speed reduction and yellow LED indication.
Viewing active and stored engine ECU codes and the Alarm Event Log.
Configuration options and activation methods for digital inputs.
Details on relay assignments, polarity, and initial states for external signals.
Categories for viewing engine parameters, fault codes, and event logs.
Overview of menu categories for system configuration and parameter adjustments.
Details on configuring panel inputs, outputs, and throttle parameters.
Configuration for engine safety protections and module settings.
Settings for CAN, Modbus communication, and emissions management.
Configuration for clutch operation and fluid refill parameters.
Panel indicators and display for DEF level monitoring and alerts.
Information on DPF soot load, ash load, and time since regeneration.
ECU control of regeneration, including lamps and display messages.
Steps for standard regeneration and conditions for service level regeneration.
Methods for inhibiting or delaying the regeneration process.
