EasyManua.ls Logo

Cupra Ateca 2020 - Net Partition; Opening the Tailboard; Trapdoor for Transporting Long Objects

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Transport and practical equipment
WARNING
Never use the hooks to hang luggage or
other objects. In case of sudden braking or
an accident, the hooks could break.
CAUTION
Each hook is designed for a maximum load
of 2.5 kg.
Trapdoor for transporting long ob-
jects*
Fig. 120
In the rear seat backrest: opening the
trapdoor.
Fig. 121
In the luggage compartment: opening
the trapdoor.
On the rear seat, behind the central armrest,
there is a tailboard for transporting long
items in the interior, such as skis.
To avoid soiling the interior, dirty objects
should be wrapped (e.g. in a blanket) before
they are inserted through the tailboard.
When the armrest is down, nobody may trav-
el in the centre rear seat.
Opening the tailboard
Lower the centre armrest.
Pull the release lever in the direction of the
arrow and push the tailboard cover
Fig. 120
1
down and forwards.
Open the rear lid.
Insert the long objects through the gap
from the luggage compartment.
Secure the objects with the seat belt.
Close the rear lid.
Closing the tailboard
Lift the tailboard cover until it engages. The
red mark on the luggage compartment side
should never be visible.
Close the rear lid.
Lift the centre armrest if necessary.
Note
The tailboard can also be opened from the
luggage compartment. To do so, press the
release lever down, in the direction of the
arrow, and the cover upwards
Fig. 121 .
Net partition*
Fig. 122
Net partition fitted.
»
137

Table of Contents

Related product manuals