EasyManua.ls Logo

Cupra Ateca 2020 - Full Link; Privacy Mode; Seat Connect Faults; Service Management

Cupra Ateca 2020
352 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data transfer
call system, cannot be disconnected or de-
activated.
Faults
Even if the prerequisites for the use of SEAT
CONNECT services are met, there may be
factors beyond the control of CUPRA that in-
terfere with the execution of such services or
prevent them. These may be specifically:
Maintenance, repair, deactivation, soft-
ware update and technical expansion of tele-
communication equipment, satellites, serv-
ers and data banks.
Change of the mobile telephony standard
for the transmission of mobile data by the
telecommunications service provider, for
example, from UMTS to EDGE or GPRS.
Disconnection of an existing mobile phone
standard by the telecommunications service
provider.
Interference, disturbance or interruption in
the reception of the mobile phone and GPS
signal due to aspects such as high-speed
driving, solar storms, meteorological influen-
ces, topography, blocking equipment and
the intensive use of mobile phones in the ra-
dio cells in question.
When in areas with zero or insufficient mo-
bile telephony or GPS signal. Also, for exam-
ple, in tunnels, confined areas between very
tall buildings, garages, underpasses, moun-
tains and valleys.
External information from third party sup-
plies available with limitations, incomplete or
incorrect, e.g. representations of maps.
Countries and regions where SEAT CON-
NECT is not offered.
Service management
Open the settings in Users and go to Privacy
and Services. You can do the following in the
infotainment system:
Check which SEAT CONNECT services are
currently available in the vehicle.
The number of SEAT CONNECT services
that are enabled or disabled.
Activate or deactivate SEAT CONNECT
services.
More information at https://my.seat.
Privacy and Services Settings
SEAT CONNECT services can be activated
and deactivated individually. To do this, just
check the box corresponding to the service
you want to activate or deactivate. Use the
privacy mode option if you want to deacti-
vate all of the services at the same time.
Privacy mode
Allows you to deactivate or activate the serv-
ices depending on the selected privacy level.
Tracking
Share location. Main users and co-
users can view position data on the
SEAT CONNECT portal or app.
Location
Use location. Position, vehicle, and
user data are used for services.
Personal
No location. Only the vehicle data and
user data are used for services.
Incognito
Maximum privacy. Your services are
disabled. Only services required for le-
gal reasons use data.
Setting options are not available in all mar-
kets or in all vehicle models.
Note
If you deactivate each and every SEAT
CONNECT service, the OCU may continue
to transmit data.
Full Link
Introduction
With Full Link it is possible to view and use
the contents and functions that are shown
»
167

Table of Contents

Related product manuals