Seat belts
How to properly adjust your
seat belt
Fastening and unfastening the seat
belt
Fig. 9
Insert the latch plate of the seat belt into
the buckle.
Fig. 10
Release the seat belt's buckle.
Properly worn seat belts hold the vehicle oc-
cupants in the position that most protects
them in the event of an accident or sudden
braking
›››
.
Fastening the seat belt
Fasten your seat belt before each trip.
●
Adjust the front seat and headrest correct-
ly
›››
page 13 .
●
Engage the seat backrest of the rear seat in
an upright position
›››
.
●
Pull the latch plate and place the belt web-
bing evenly across your chest and lap. Do
not twist the seat belt when doing so
›››
.
●
Engage the latch plate in the buckle of the
corresponding seat
›››
Fig. 9 .
●
Pull the belt to ensure that the latch plate is
securely engaged in the buckle.
Releasing the seat belt
Only unfasten the seat belt when the vehicle
has come to a standstill
›››
.
●
Press the red button on the buckle
›››
Fig. 10. The latch plate is released from
the buckle.
●
Guide the belt back by hand so that it rolls
up easily and the trim will not be damaged.
WARNING
●
The seat belt cannot offer its full protec-
tion unless the seat backrest is in an upright
position and the seat belt is worn correctly,
according to your size.
●
Unbuckling your seat belt while the vehi-
cle is in motion can cause severe or fatal in-
juries in the event of an accident or sudden
braking.
●
The seat belt itself, or a loose seat belt,
can cause severe injuries if the belt moves
from hard areas of the body to soft areas
(e.g. the stomach).
19
To Next Page
Loading...
