Cupra ATECA 2022 - Page 168

166
Assistant systems
Operating Travel Assist
Fig.119 Left side of the multifunction
steering wheel
Switch on and start regulation
1.
While driving with ACC activated, press
on the multifunction steering wheel.
The vehicle switches from ACC to Travel
Assist.
Depending on the driving situation, the vehi-
cle switches to the following system statuses in
Travel Assist:
●
When ACC is regulating, Travel Assist main-
tains the current speed and the preset dis-
tance to the vehicle in front.
When lane markings are detected, the vehicle
is also kept in the lane by steering movements.
●
If ACC is not regulating, Travel Assist remains
selected but in a passive (unregulated) status.
1.
Press the button.
Travel Assist switches to the active system
status, depending on the driving situation.
The indicator lamp for the driving situation
lights up on the instrument cluster display. A
message is also displayed.
Interrupting the adjustment
1. Briey press the button .
OR: press the brake pedal.
The set distance remains saved.
Switch to ACC
1. Press the button on the multi-function
steering wheel.
The vehicle switches from Travel Assist to
the ACC system status corresponding to
the driving situation.
Making other adjustments
All other aspects of Travel Assist are controlled
like the ACC.
Troubleshooting
Travel Assist is not available or does not
work as expected
The control lamp switches on yellow. A rele-
vant warning is also displayed on the instru-
ment panel screen.
●
There is a fault in the sensors. Check the
causes and solutions described in the informa-
tion about the ACC ›››page156 or Lane As-
sist ›››page163.
●
There is a fault or a defect. Switch the engine
o and on again.
●
The system limits are exceeded.
●
If the problem persists, consult a specialised
workshop. CUPRA recommends visiting a spe-
cialised CUPRA dealer or any SEAT dealership.
Grip the steering wheel
The warning lamp lights up white, and a mes-
sage is shown on the instrument cluster dis-
play.
●
You released the steering wheel for a few
seconds. Take hold of the steering wheel and
take control of the vehicle.
Grip the steering wheel
The warning lamp lights up red and a message
is shown on the instrument cluster display. De-
pending on the situation, an audio warning
sounds or the steering wheel vibrates.