Cupra ATECA 2022 - Page 177

Parking and manoeuvring
175
General information on parking systems
3. If the engine stalls.
4. Automatic gearbox: If the accelerator is
pressed.
5. Automatic gearbox: If any of the tyres have
only minimal contact with the ground, e.g.
For example, if the axles are crossed.
WARNING
The smart technology of the Auto-Hold can-
not overcome the limits imposed by the laws
of physics and it only operates within the lim-
its of the system. Never allow the enhanced
convenience of the Auto-Hold function to in-
duce you to take any risk that compromises
safety.
●
Never leave the vehicle running with the
AutoHold function switched on.
●
The Auto-Hold cannot always keep the ve-
hicle stopped on an uphill, or brake it sui-
ciently on a downhill, e.g. on slippery or icy
surfaces.
NOTICE
Always deactivate the Auto-Hold function
before entering an automatic car wash fa-
cility. Failure to do so could cause damage
due to the automatic application of the park-
ing brake.
General information on
parking systems
Automatic brake operation
The automatic braking feature of a parking sys-
tem is used to reduce the danger of collision
when an obstacle is detected during a parking
manoeuvre.
Braking functions
Depending on the equipment, the following
systems are available:
●
Park assist plus manoeuvre braking function
›››page176.
●
Rear cross traic alert emergency brake
function ›››page197.
●
Assisted parking assistant emergency brake
function ›››page182.
●
Trailer Assist manoeuvre braking function
›››page196
Requirements
●
The vehicle is moving between approx.
3km/h and 8km/h when manoeuvring
●
A parking system is switched on.
The brakes are not automatically operated
when park assist is switched on automatically
while moving forward.
What happens in the event of automatic
braking?
If there is an obstacle, the system brakes the
vehicle to a standstill and keeps it stationary for
approx. 2 seconds. Press the brake!
Activate
●
Automatic braking is activated when the
driver switches a parking system on.
Deactivating
●
The automatic brake operation function de-
activates when a park assist system is switched
o.
●
OR: to temporarily deactivate the manoeu-
vre braking function, press the function
button on the park assist screen and change
the setting.
WARNING
Never allow the automatic braking opera-
tions of park assist systems to lead you to
take any risk that compromises safety. In cer-
tain situations, the automatic braking inter-
vention may only work in a limited way or
not work at all. Collisions with obstacles can
injure people and damage the vehicle. The
system is not a replacement for driver aware-
ness.