Commands
To help the voice control recognise commands
reliably:
●
Pronounce clearly. Confusing commands are
not recognised. Speak in a normal tone of
voice. Speak a little louder if you are driving at
high speed.
●
Avoid outside noises. Open windows and
doors can interfere with voice control.
●
Avoid other secondary noises, such as con-
versations in the vehicle. Do not direct the air
ow from the outlets towards the microphone
or the interior lining of the roof.
●
Do not make long pauses.
Voice control is active and recogni-
ses the words pronounced.
Note
●
When the activation word is disconnected,
the infotainment system cannot be activated
by means of the activation word. Voice con-
trol is still available via the button on the
multifunction steering wheel.
●
Availability depends on country and equip-
ment.
Start and stop voice control
Depending on the equipment, you can start
voice control in dierent ways.
Start voice control
●
Voice control activation: say the word that
activates voice control.
●
Multifunction steering wheel: press the voice
control button .
In some cases you can also start voice con-
trol of the connected mobile phone device, by
pressing and holding the voice control button.
Manually ending voice control
Voice control can be cancelled with the Can-
cel command.
●
Multifunction steering wheel: press the voice
control button twice in a row, or press and
hold.
The voice control ends automatically, if you
use infotainment functions, if the parking sys-
tem is activated or by incoming calls.
To Next Page
Loading...
