Cupra ATECA 2022 - Fuel Types

268
Fuel and exhaust gas cleaning
1)
Depending upon country.
1
2
Refuelling
Fig.176 Fuel tank ap with tank cap
attached.
The fuel tank ap is on the rear right of the
vehicle.
●
The tank ap is unlocked when the car is un-
locked using the central locking remote con-
trol ›››page68.
●
Open the fuel tank ap by pressing on the
retainer zone.
●
Unscrew the cap by turning it to the left.
●
Place it in the space on the hinge of the open
ap ›››Fig.176.
●
Start refuelling. The tank is full as soon as
the pump’s automatic nozzle cuts o the fuel
supply. Do not try to put in more fuel after the
nozzle cuts out, as this will ll the expansion
chamber in the fuel tank.
●
Unscrew the cap by turning it to the right as
far as it will go.
●
Close the lid.
The correct fuel grade for your vehicle is given
on a sticker on the inside of the fuel tank
ap. Further notes on fuel can be found at
›››page268.
The capacity of your vehicle's fuel tank is given
in ›››page336.
Fuel types
Identication of fuels
1)
Fig.177 Identication of fuels according to
European Union (EU) Directive 2014/94/
Fuels are identied by dierent symbols on
the pump and on your vehicle's tank ap.
The identication serves to prevent confusion
when choosing the fuel.
Petrol with ethanol (“E” stands for Etha-
nol). The number indicates the percent-
age of ethanol in the petrol. “E5” means,
for example, an ethanol ratio of 5% max.
Diesel according to EN590 standard. The
number indicates the maximum percent-
age of Biodiesel in the fuel. “B7” means a
maximum of 7% Biodiesel.