Cupra BORN 2022 - Driver Information; Control Lamps

18
Driver information
Driver information
Control lamps
Control and warning lamps
The warning and control lights can be lit indi-
vidually or in combination and serve as a warn-
ing, to indicate the presence of an anomaly or
to warn of the activation of certain functions.
Some turn on when the ignition is switched
on and have to be switched o after a certain
period of time.
The control lamps that light up on the light
control are explained in chapter ›››page113,
Lights.
WARNING
If the warning lamps and messages are ig-
nored, faults may occur in the vehicle, it may
stall in traic, or accidents and serious inju-
ries may occur.
●
Never ignore the warning lamps or text
messages.
●
Stop the vehicle safely as soon as possible.
Sym-
bol
Meaning
Stop driving!
Central warning lamp ›››page25
Sym-
bol
Meaning
Fasten your seat belt ›››page42
Deep discharge of the high-voltage
battery ›››page77
Electronic parking brake on
›››page187
Stop driving!
Fault in the brake system
›››page152
Stop driving
Brake uid level low ›››page290
Stop driving!
The electromechanical brake servo
is not working ›››page155
Take control of the vehicle and be
ready to brake! ›››page163
Stop driving!
Fault in the motor coolant system
›››page290
Stop driving!
Steering anomaly ›››page149
Sym-
bol
Meaning
Stop driving!
Fault in the high voltage system
›››page77, ›››page148,
›››page276
Stop driving!
12volt battery ›››page295
High-voltage battery empty -Driv-
ing not possible ›››page142,
›››page143
Health risk! Open the windows!
CO
2
concentration too high
›››page135
Collision warning ›››page171
Take control of the steering imme-
diately ›››page180
Central warning lamp ›››page25
Airbag or belt tensioner system
deactivated by a diagnostic tester
›››page50
Fault in the airbag system or the
seat belt tensioners ›››page50
Range calculation failure
›››page77